Hubei Ruitu Technology Co., Ltd. is one of the leading manufacturers and suppliers of maxus 500m³ h flood pump truck in China. If you're going to wholesale the newest maxus 500m³ h flood pump truck made in China, welcome to get quotation from our factory. All customized products and OEM products are with high quality and competitive price.
Maxus 500m³ h Flood Pump Truck is designed for water removal in urban waterlogging, rural flood drainage, construction site dewatering, and low-lying area emergencies. A centrifugal pump delivers 500 m³/h, clearing standing water quickly.
The truck uses a Maxus commercial chassis (SH1032E6DD-P) with four-wheel drive and an automatic transmission. It operates on city streets, rural roads, and unpaved construction sites. The pump and piping are made of corrosion-resistant materials, suitable for rainwater, surface water, and lightly contaminated water.
A 25 kW onboard generator powers the submersible pump. The pump unit weighs 32 kg and can be carried by two people to locations the truck cannot reach, with suction hose lengths up to 15 meters.





Our Advantages
1. Vehicle-mounted integration – Maxus 500m³ h Flood Pump Truck carries the pump, generator, hoses, and accessories in one unit. From arrival to pumping, setup typically takes 5–8 minutes. No separate support vehicle is needed.
2. Four wheel drive – The chassis has 4WD and automatic transmission. Minimum ground clearance is not specified, but the approach/departure angles (26°/29°) allow the truck to enter flooded areas with standing water up to approximately 400–500 mm without stalling.
3. Portable pump – The submersible pump weighs 32 kg. Two operators can carry it down embankments or into deep water where the truck cannot drive. The generator supplies power through a 20-meter cable.
4. Customizable configuration – Hose length (standard 15 m suction, 30 m discharge), control system (manual or remote), and storage compartments can be adjusted per project requirements.
FAQ
Product Parameters
|
Parameter |
Content |
|
Maximum Gross Mass |
3050 kg |
|
Drainage System |
500 m³/h, equipped with 1 portable ultra-lightweight high-speed submersible pump. Single pump flow rate: 500 m³/h, head: 10 m, power: 22 kW, single pump weight: 32 kg. |
|
Generator Set |
25 kW |
|
Wheelbase |
3480 mm |
|
Vehicle Dimensions (L×W×H) |
5475 mm × 1960 mm × 2200 mm |
|
Chassis Model |
SH1032E6DD-P |
|
Approach/Departure Angle |
26°/29° |
|
Tires |
245/70R16 |
|
Engine Model |
SC20M163Q6B |
|
Engine Displacement |
1996 mL |
|
Emission Standard |
China VI |
|
Rated Power |
120 kW |
|
Maximum Speed |
170 km/h |
|
Drive Type |
4WD |
|
Transmission |
Automatic |
|
Front/Rear Overhang (mm) |
967/1028 |
|
Number of Axles |
2 |
Hot Tags: maxus 500m³ h flood pump truck, China maxus 500m³ h flood pump truck manufacturers, suppliers, factory, drainage vehicle, ISUZU 3000m H Flood Pump Truck, ISUZU 3000m³ H Flood Pump Truck, JMC 1000m H Drainage Pump Truck, JMC 1000m³ H Drainage Pump Truck, Maxus 500m³ H Flood Pump Truck
