Customized Diesel Mobile CT Truck

Serial Number

Content

Technical parameters and requirements

One

Vehicle body

1

Fangcang

2

Container

1. Container dimensions (length * width): ≥9000 * 2400mm, interior clearance ≥
1900mm

2. The container is sealed and waterproof, and has heat insulation and sound insulation.

3. There are three boarding doors on the right side of the medical area, each with a small, enclosed window.

4. The front of the modular cabin is the ultrasound/ECG examination area, the middle is the DR examination area, and the rear is the testing area;
each area has independent entrances and exits, and emergency equipment doors are reserved at the junctions of each area to facilitate
equipment inspection and maintenance, and the width of the connecting doors is also provided.

Two

Outside the car

1

Car ladder

Concealed boarding stairs are installed below the entrances and exits of each area. Both the boarding stairs and the boarding platform are equipped with handrails
. The handrails are foldable but cannot be easily removed.

2

Skirt Box

The vehicle has four side skirts on each of its left and right sides.

The bottom edge of the skirt box is more than 450 mm above the ground.

3

Exterior color of the whole vehicle

Same color as the front of the car

4

External signage

Agreed upon when signing the contract

Three

Inside the car

1

Reinforcing materials

All reinforcing steel components inside the vehicle require rust prevention pretreatment, and rust prevention treatment must be applied again after welding.
All screws, nuts, and other fasteners must also undergo rust prevention treatment. All external fasteners must be made of stainless steel.

2

Heat insulation and sound insulation

The space between the outer shell and the inner wall of the vehicle must be completely filled with environmentally friendly, flame-retardant, heat-insulating, and sound-insulating materials.

3

Car interior wall

The inner wall material is made of environmentally friendly and flame-retardant material.

4

Car interior

The inner wall material is made of environmentally friendly flame-retardant material.

5

Car interior decoration

Light green

6

Air conditioning duct

Add an air immersion duct to the air conditioning system to ensure that the air conditioning can deliver air evenly to the medical area.

7

Floor

The bottom layer is laid with bamboo plywood and medical flooring.

8

Workbench cabinet

The workbench is L-shaped, made of melamine-faced wood, with a phenolic resin tabletop. Drawers and storage cabinets are located underneath the tabletop , without restricting leg movement.

9

Office chair

Two swivel chairs for medical staff are installed in front of the workbench.

11

Disabled boarding facilities

An automatic lifting mechanism, hydraulically driven, is installed at the chassis location. Load capacity ≥ 400KG.

12

Interior lighting

Interior lighting uses lamps, and working lighting is provided in the skirt boxes of each equipment compartment; emergency lighting is installed at the boarding gate of the modular shelter .